Cannot connect to virtual server via a browser

I have two web servers and a virtual server to load balance the client traffic in my lab. The status of the pool members and the virtual server are available. I can ping both of them.

However, when I use a browser to connect to the virtual server to direct to the web servers. A error message shows that “Page not found”.

any help is appreciated

can you try snat automap under virtual server configuration?

if it does not help, you may need to try tcpdump to see what is going on.

tcpdump -nni 0.0:nnn -s0 -w /var/tmp/output.pcap host x.x.x.x or host y.y.y.y -v
x.x.x.x is client ip
y.y.y.y is pool member ip

hi nitass

when I use your command provided above, following can be found.

[root@ltm_01:Active:Standalone] config tcpdump -nni 0.0:nnn -s0 -w /var/tmp/output.pcap host 10.0.0.115 or host 10.40.81.1 -v

tcpdump: listening on 0.0:nnn, link-type EN10MB (Ethernet), capture size 65535 bytes

^Ct 66

66 packets captured

66 packets received by filter

0 packets dropped by kernel

what can be looked into finding out the problems. Thanks.

you can download it to your laptop/desktop and check it using wireshark.