Cannot access serial terminal / reinstall failed / EUD

Dear all,

I have a serious problem with one of our 2 BIG-IP 3600 LTM I did a reinstall from an image located on the hd (10.2.3) with factory settings (no config backup).

On the first one, it worked well, but on the second one i get the “EUD” message on the LCD panel (maybe after a power failure during setup)

So i tried to resintall it from image located on a CD but it’s impossible to access the serial console with the following parameters (i get garbage caracteres): Baud rate: 19200, Data bits: 8, Parity: None, Stop bit:1, Flow control: none

It tried with every baud rate, rebooting the BIG-IP…same problem

It tried on the over BIG-IP with same serial null modem cable and it works fine

So, it’s impossible from me to log in and use serial console and to reinstall the failed BIG-IP from CD

Do you have an idea how i could access serial console or reinstall this BIG-IP ?

Many thanks

Regards

Hugues

Hi Hugues,

I suggest opening a case with F5 Support to troubleshoot this.

Aaron