Forum Discussion
Amit_Kumar9602
Altocumulus
AltocumulusF5 Switches in 'Changes Pending' Status
Hello,
The F5 switches in operation are in 'Changes Pending' status. color is 'red'
Q1. (It is assumed that the status occurred after executing the commands below on both the Primary and Secondary devices. Is this correct?)
modify cli preference pager disabled display-threshold 0
Q2. If a Sync is performed under the current status, can you confirm if there will be any service issues?
Q3. Please let me know the command or method to check the current changes.
Q4. Could you please advise on how to resolve this issue?
I have conducted many tests on this issue and confirmed that when the specified command is entered, the status changes to 'Changes Pending. (yellow)' I also found that to check when the status changed, I can refer to the "/var/log/audit" file, but this log file only retains data for 8 days, including the current date. Thank you for your response!
K09481301:Modifying cli preference display-threshold changes the sync status to Changes Pending
Hey Amit_Kumar9602 ,
I have Tested this change in my VE in the Lab but nothing in color happen i.e Red color I mean.
Yes, according to this article: https://my.f5.com/manage/s/article/K000132130 , you need to issue config sync
before that, to validate that there is no issues in BIGIP device >>> Check the ltm log file ( /var/log/ltm )
Check if there is a weird log about BIGIP Status.
Amit_Kumar9602I have conducted many tests on this issue and confirmed that when the specified command is entered, the status changes to 'Changes Pending. (yellow)' I also found that to check when the status changed, I can refer to the "/var/log/audit" file, but this log file only retains data for 8 days, including the current date. Thank you for your response!
K09481301:Modifying cli preference display-threshold changes the sync status to Changes Pending
